11. Using the Wi-Fi function
320
∫
Sending images in the camera to a web service with simple operations
Once you send an image, you can send other images to a web service with simple,
smartphone-like operations in an environment where a wireless access point connection is
available.
(The instructions below assume that you are already registered to “LUMIX CLUB”
and the camera has a record of a connection to a wireless access point.)
1
Display an image.
2
Press
4
.
(When group pictures are selected, proceed to select
[Upload(Wi-Fi)].)
• The same operation can be performed by touching [
].
(When group pictures are selected, touch [
], and select
[Upload(Wi-Fi)].)
3
Select [Yes] on the confirmation screen.
4
Select a web service.
5
Check the send settings, and select [Set].
• The camera will connect to a previously connected wireless access point and sends the
image to a web service.
• To change the send setting, press [DISP.].
• Step
4
,
5
are not necessary when you continue to send another image.
The image will be sent to the same web service with the same send settings.
• To terminate the connection, press [MENU/SET] or operate other controls to exit the
playback screen. You can also terminate the connection by pressing [Wi-Fi].
To change the settings for sending images or web service
Terminate the Wi-Fi connection, and follow step
1
and onwards again.
• You can also change the send settings by pressing [Wi-Fi] while using a Wi-Fi connection.
• If the camera has no records of connections to wireless access points that are available, a
screen that asks you to select a connection method is displayed. Select a connection method,
and connect the camera to a wireless access point.
• When you are not registered to “LUMIX CLUB”, a screen that asks you to acquire a new login
ID is displayed. Acquire a login ID and set a password.
• When group pictures are displayed continuously, all pictures in the group will be sent. When
group pictures are displayed one by one, the currently displayed picture will be sent.
SUB
MENU
