57
Preparation
• The [E-Shutter Vol] only works when [SH] for Burst Mode or [Electronic Shutter] is set to [ON].
• When you connect the camera to a TV, the volume of the TV speakers does not change.
• It will adjust the monitor when the monitor is in use, and the viewfinder when the viewfinder is in
use.
• Some subjects may appear differently from actuality on the monitor. However, this does not
affect the recorded pictures.
[Beep]
Set the volume for electronic noises and the electronic shutter
noise.
[Beep Volume]:
[
u
] (High)
[
t
] (Low)
[
s
] (OFF)
[E-Shutter Vol]:
[
] (High)
[
] (Low)
[
] (OFF)
[Speaker Volume]
Adjust the volume of the speaker to any of the 7 levels.
[Monitor Display]/
[Viewfinder]
Brightness, colour, or red or blue tint of the Monitor/viewfinder is
adjusted.
[
] ([Brightness]):
Adjust the brightness.
[
] ([Contrast · Saturation]):
Adjust the contrast or clarity of colours.
[
] ([Red Tint]):
Adjust the red tint.
[
] ([Blue Tint]):
Adjust the blue tint.
1
Touch the item.
2
Drag the slide bar to adjust.
• Adjusting can also be performed by rotating the rear dial.
3
Touch [Set].
DMC-G6PDF-VQT4Z82_mst.book 57 ページ 2013年4月18日 木曜日 午前11時53分