
320
Others
[Editing operation cannot proceed as information processing is ongoing.]
• When there are too many image files, the currently retrieving information icon ([
] or
[
]) may be displayed on the playback screen for a long period of time. During this time,
deletion and use of the [Playback] menu are not possible.
• If this unit is turned off while acquiring information, only the pictures that have already
acquired the information are saved as a group. When you switch on again, the information
retrieval will restart from the same point.
[This battery cannot be used]
• Use a genuine Panasonic battery. If this message is displayed even when a genuine
Panasonic battery is used, contact the dealer or Panasonic.
• If the battery terminal is dirty, clean it and remove any objects.
[Failed to connect wireless access point]/[Connection failed]/[No destination
found]
• Check following regarding the wireless access point.
>
The wireless access point information set on this unit is wrong. Check the authentication
type, encryption type, and encryption key.
>
Power of the wireless access point is not turned on.
>
Setting of the wireless access point is not supported by this unit.
• Check the network setting of the destination.
• Radio waves from other devices may block the connection to a wireless access point. Check
other devices that are connected to the wireless access point and devices that use the
2.4 GHz band.
[No picture to send]
• This is displayed when there is no image to transmit due to the restriction of the destination.
Check the file format of the image to send.
[Connection failed. Please retry in a few minutes.]/[Network disconnected. Transfer
stopped.]
• Radio waves from the wireless access point are getting weak. Perform the connection closer
to the wireless access point.
• There is no reply from the server or it has exceeded the communication processing time. Try
again after a while.
• Depending on the wireless access point, connection may be automatically disconnected after
specific time has passed. Reconnect the connection again.
DMC-G6PDF-VQT4Z82_mst.book 320 ページ 2013年4月18日 木曜日 午前11時53分