136
Recording
Changing the settings for a power zoom lens
This may only be selected when using a lens that is compatible with power zoom
(electrically operated zoom).
– The interchangeable lens (H-PS14042) is compatible with power zoom.
– The interchangeable lenses (H-FS14140, H-FS1442A, H-FS014042, H-FS45150) are not
compatible with power zoom.
(For compatible lenses, please refer to our website.)
[MENU]
>
[Custom]
>
[Power Zoom Lens]
Item
Description of settings
[Disp Focal
Length]
When you zoom, the focal distance is
displayed and you can confirm the zoom
position.
A
Focal distance indication
B
Current focal distance
[ON]/[OFF]
[Step Zoom]
When you operate the zoom with this
setting [ON], the zoom will stop at
positions corresponding to predetermined
distances.
C
Step zoom indication
• [Step Zoom] is disabled during motion
picture recording.
[ON]/[OFF]
[Zoom Resume]
When you turn this unit on, the zoom positions when you last turned
this unit off are automatically restored.
[ON]/[OFF]
[Zoom Speed]
You can set the zoom speed for zoom operations.
• If you set [Step Zoom] to [ON], the zoom speed will not change.
[Photo]:
[H]
(High speed)
/[M]
(Middle speed)
/[L]
(Low speed)
[Video]:
[H]
(High speed)
/[M]
(Middle speed)
/[L]
(Low speed)
[Zoom Ring]
This may only be selected when a power zoom-compatible lens with a
zoom lever and zoom ring is attached. When set to [OFF], the
operations controlled by the zoom ring are disabled to prevent
accidental operation.
[ON]/[OFF]
B
A
C
DMC-G6PDF-VQT4Z82_mst.book 136 ページ ２０１３年４月１８日 木曜日 午前１１時５３分
