- 143 -
Recording
• It will display dial operation guide to the screen that is possible to perform
Exposure Compensation, Programme Shift, aperture setting, or shutter speed
setting when set to [ON].
• Imaging device and image processing is optimised when the camera is purchased. Use this
function when bright spots that do not exist in the subject get recorded.
• Turn the camera off and on after the pixels are corrected.
• Dust reduction function will operate automatically when the camera is turned on, but you can
use this function when you see dust.
• When using a Leica lens mount adaptor (DMW-MA2M, DMW-MA3R; optional), set it to [ON].
[TOUCH GUIDE]
When playing back the pictures, this allows you to set either to
display or not display the guide screen of the touch panel.
[OFF]/[ON]
[TOUCH SCROLL]
This allows you to set the speed of continuously forwarding or
rewinding pictures using touch operation.
[H]:
High speed
[L]:
Low speed
[DIAL GUIDE]
Set whether or not to display the dial operation guide.
[OFF]/[ON]
[MENU RESUME]
The last operated menu position is saved even if the camera is
turned off.
[OFF]/[ON]
[PIXEL REFRESH]
It will perform optimization of imaging device and image
processing.
[SENSOR CLEANING]
Dust reduction to blow off the debris and dust that have affixed to
the front of the imaging device is performed.
[SHOOT W/O LENS]
It is possible to setup so the shutter will not operate when there is
no lens on the unit.
[OFF]:
You cannot press the shutter button when a lens is not
attached to the camera body or is not attached
correctly.
[ON]:
Shutter will operate regardless of the lens on the unit.
