Panasonic Lumix DMC-FZ200 Operating Instructions For Advanced Features Download Page 50

Page: 50 / 220

- 50 -

Basic

By using [Delete Multi], you can delete up to the following number of pictures.

Note

• Do not turn the camera off while deleting. Use a battery with sufficient battery power or the AC

adaptor (optional).

• Depending on the number of pictures to be deleted, it may take some time to delete them.

To delete multiple pictures or all the pictures

(DMC-FZ200)

100 pictures

(DMC-FZ60)

50 pictures

Press [

Press

to select [Delete Multi] or [Delete

All] and then press [MENU/SET].

• [Delete All]

Confirmation screen is displayed.

Pictures are deleted by selecting [Yes].

• It is possible to delete all pictures except the ones set as

favourite when [All Delete Except Favorite] is selected with
the [Delete All] set.

(When [Delete Multi] is selected) Press

to select the picture, and then press

[DISP.] to set.

(Repeat this step.)

• [ ] appears on the selected pictures. If [DISP.] is pressed

again, the setting is cancelled.

(When [Delete Multi] is selected) Press [MENU/SET].

• Confirmation screen is displayed.

Pictures are deleted by selecting [Yes].

(DMC-FZ200)

• Burst picture group (pictures with the burst icon [

]) will be treated as a single picture. Deleting the

burst picture group will delete all pictures in the group.

(P154)

ュリヴヱハ

Summary of Contents for Lumix DMC-FZ200





























































































































































































































Search results

Summary of Contents for Lumix DMC-FZ200

Reviews:

Related manuals for Lumix DMC-FZ200

Brands by name

Popular brands

Panasonic Lumix DMC-FZ200, Operating Instructions For Advanced Features

Search results

Summary of Contents for Lumix DMC-FZ200

Reviews:

Related manuals for Lumix DMC-FZ200

Brands by name

Popular brands