Panasonic Lumix DMC-FZ200 Page 159 Operating Instructions For Advanced Features Download

Page: 159 / 220

- 159 -

Playback/Editing

Pictures are classified into only still pictures, only motion pictures, or only 3D pictures etc., and
played back.

∫

About the categories to be sorted

It will be sorted as following when [Category Selection] is set.

1 Press

to select the person to play back and then press [MENU/SET].

2 The whole group with pictures taken with burst settings [

] and [

] will be treated as face

recognition pictures.

[Filtering Play]

Settings

Description of settings

[Picture Only]

Only still pictures are played back.

[Video Only]

Only motion pictures are played back.

[3D Play]

Only 3D pictures are played back.
• Refer to

P180

for the method to play back [3D Play] pictures in 3D.

[Category Selection]

This mode allows you to search images by Scene Mode or other categories
(such as [Portrait], [Scenery] or [Night Scenery]) and sort the pictures into
each of the categories. You can then play back the pictures in each
category.

Press

to select the category and

then press [MENU/SET] to set.

• Only the category for which pictures have been

found can be selected.

[Favorite]

You can play back the pictures you have set as [Favorite]

(P170)

Recording information e.g. Scene Modes

[Face Recog.]

[Portrait], [i-Portrait], [Soft Skin], [Night Portrait], [i-Night Portrait], [Baby1]/[Baby2],
[i-Baby]

[Scenery], [i-Scenery], [Panorama Shot], [Sunset], [i-Sunset]

, [Glass Through]

[Night Portrait], [i-Night Portrait], [Night Scenery], [i-Night Scenery], [Handheld Night
Shot], [iHandheld Nite Shot]

[Sports], [Panning]

[Baby1]/[Baby2], [i-Baby]

[Pet]

[Food]

[Travel Date]

(DMC-FZ200)

Pictures taken with burst speed set to [

] or [

]

Summary of Contents for Lumix DMC-FZ200





























































































































































































































Search results

Summary of Contents for Lumix DMC-FZ200

Reviews:

Related manuals for Lumix DMC-FZ200

Brands by name

Popular brands

Panasonic Lumix DMC-FZ200, Operating Instructions For Advanced Features

Search results

Summary of Contents for Lumix DMC-FZ200

Reviews:

Related manuals for Lumix DMC-FZ200

Brands by name

Popular brands