- 145 -
Recording
Applicable modes:
Adjust the flash output if the recorded pictures are too bright or too dark.
Note
• You can adjust from [
j
2 EV] to [
i
2 EV] in steps of [1/3 EV].
• Select [0 EV] to return to the original flash output.
• [
i
] or [
j
] is displayed on the flash icon in the screen when the flash level is adjusted.
Applicable modes:
When Red-Eye Reduction ([
], [
]) is selected, Red-Eye Removal is performed
whenever the flash is used. The camera automatically detects red-eye and corrects the picture.
Settings: [ON]/[OFF]
Note
• Only available when [AF Mode] is set to [
š
] and Face Detection is active.
• Under certain circumstances, red-eye cannot be corrected.
• It will be fixed to [ON] during the Intelligent Auto Mode.
• [Red-Eye Removal] cannot be used in the following cases.
– [3D Photo Mode] (Scene Mode)
Applicable modes:
With the optional conversion lenses, you can record even more faraway pictures and take
close-up pictures of smaller subjects.
Note
• Refer to
for details about attaching the lens.
• Ensure that [Conversion] is set to [OFF] when not using a conversion lens.
• [Conversion] cannot be used in the following cases.
– [Panorama Shot]/[3D Photo Mode] (Scene Mode)
• Read the operating instructions of the conversion lens for details.
[Flash Adjust.]
[Red-Eye Removal]
[Conversion]
Settings
Description of settings
[ ]
When you attach the tele conversion lens.
[
]
When you attach the close-up lens.
[OFF]
—
C
