
59
3.
Basic Operation
Taking a Still picture
• Set the drive mode dial to [
] (single recording).
1
Select the Recording Mode.
2
Press the shutter button halfway to focus.
A
Aperture value
B
Shutter speed
• Aperture value and shutter speed are displayed.
(It will flash in red if the correct exposure is not
achieved, except when set to flash.)
• The focus indication is displayed as [
] in a dark environment, and focusing may take
longer than usual.
• When the Focus Mode is set to [AFF] or [AFC].
– A beep will be emitted when focus is first achieved during the pressing halfway.
– If AF Mode is set to [Custom Multi], such as [
] or [
], the AF area is displayed for a
moment only when focus is achieved for the first time by pressing the shutter button halfway .
3
Press the shutter button fully (push it in further), and take
the picture.
Focus
When the subject is
focused
When the subject is not
focused
Focus indication
C
On
Blinks
AF area
D
Green
—
Sound
Beeps 2 times
Beeps 4 times
60
60
60
2.8
2.8
2.8
B
A
C
D
LOW