207
9.
Stabilizer, Zoom and Flash
Applicable modes:
Adjust the flash brightness when pictures taken with the flash are over or underexposed.
1
Select the menu.
2
Press
3
/
4
to select [Flash Adjust.] and then press [MENU/SET].
3
Press
2
/
1
to set the flash output and then press [MENU/SET].
• You can adjust from [
j
3 EV] to [
i
3 EV] in steps of 1/3 EV.
• Select [
n
0] to return to the original flash output.
• [
i
] or [
j
] is displayed on the flash icon in the screen when the flash level is adjusted.
• It can be set only when [Wireless]
in [Flash] is set to [OFF] and [Firing Mode]
is
set to [TTL].
• The [Flash Adjust.] setting also applies to an external flash. (excluding the wireless flash)
Applicable modes:
When [Auto Exposure Comp.] in [Flash] in the [Rec] menu is set to [ON], the brightness of
the built-in flash will automatically be set to the level appropriate to the selected Exposure
Compensation.
• For details on Exposure Compensation, refer to
• The [Auto Exposure Comp.] setting also applies to an external flash.
Adjust the flash output
>
[Rec]
>
[Flash]
Synchronizing the output of the built-in flash to the Exposure
Compensation
MENU
