Panasonic Lumix DMC-FX80 Operating Instructions Manual Download

Page: 76 / 171

Recording

- 76 -

∫

Available Flash Settings in Recording Mode

The available flash settings depend on the Recording Mode.
(

: Available, —: Not available,

: Scene Mode initial setting)

[

] is displayed.

• The flash setting may change if the Recording Mode is changed. Set the flash setting again if

necessary.

• The flash setting is memorised even if the camera is turned off. However, the Scene Mode flash

setting is reset to the initial setting when the Scene Mode is changed.

• Flash will not be activated when recording motion picture.

∫

The available flash range

• The available flash range is an approximation.

‡

‰

—

;

—

Wide

Tele

[Auto] in

[Sensitivity]

60 cm (2.0 feet) to 4.1 m (13 feet)

1.0 m (3.3 feet) to 1.6 m (5.2 feet)

Summary of Contents for Lumix DMC-FX80












































































































































































Search results

Summary of Contents for Lumix DMC-FX80

Reviews:

Related manuals for Lumix DMC-FX80

Brands by name

Popular brands

Panasonic Lumix DMC-FX80, Operating Instructions Manual

Search results

Summary of Contents for Lumix DMC-FX80

Reviews:

Related manuals for Lumix DMC-FX80

Brands by name

Popular brands