Recording
- 74 -
Entering Text
It is possible to enter babies’ and pets’ names and the names of travel destinations when
recording. (Only alphabetical characters and symbols can be entered.)
Display the entry screen.
• You can display the entry screen via the following operations.
– [Name] of [Baby1]/[Baby2] or [Pet] in Scene Mode
– [Name] in [Face Recog.]
– [Location] in [Travel Date]
– [Title Edit]
Enter characters.
• Touch [
] to switch text between [A] (capitals), [a]
(small case), [1] (numbers) and [&] (special
characters).
• Touching [ ]/ [ ] will move the position of the text
input cursor left and right.
• Touch [
]
] to enter a blank, or [Delete] to delete an entered character.
• The following characters and numbers can be entered.
– A maximum of 30 characters can be entered (Maximum of 9 characters when setting
names in [Face Recog.]).
¢
A maximum of 15 characters can be entered for [ ], [ ], [ ], [ ] and [ ]
(Maximum of 6 characters when setting names in [Face Recog.]).
Touch [Set].
Note
• Text can be scrolled if all of the entered text does not fit on the screen.
• It is displayed in order of title, location, [Name] ([Baby1]/[Baby2], [Pet]), [Name] ([Face
Recog.]).
