Panasonic Lumix DMC-FX80 Operating Instructions Manual Download

Page: 53 / 171

- 53 -

Recording

Applicable modes:

Taking pictures using the touch operation

(Touch Shutter function)

Just by touching the subject to focus, it will focus on the subject and take the picture
automatically.

Touch [

• Icon will change to [

], and taking a picture with

the Touch Shutter function becomes possible.

: Touch Shutter enabled

: Touch Shutter disabled

Touch the subject you wish to

focus on, and then take a picture.

• AF area is displayed at the position you touch, and a picture is taken. (It cannot be set to

edge of the screen)

Touch [

] to cancel the Touch Shutter function.

Note

• Touch Shutter setting is memorised even if the camera is turned off.

• You cannot record motion pictures with the Touch Shutter.

Summary of Contents for Lumix DMC-FX80












































































































































































Search results

Summary of Contents for Lumix DMC-FX80

Reviews:

Related manuals for Lumix DMC-FX80

Brands by name

Popular brands

Panasonic Lumix DMC-FX80, Operating Instructions Manual

Search results

Summary of Contents for Lumix DMC-FX80

Reviews:

Related manuals for Lumix DMC-FX80

Brands by name

Popular brands