Panasonic Lumix DMC-FX80 Operating Instructions Manual Download

Page: 136 / 171

Connecting to other equipment

- 136 -

Saving the Recorded Still Pictures and Motion

Pictures

Methods to export still pictures and motion pictures to other devices will vary depending on
the file format (JPEG, MPO, AVCHD, or MP4). Here are a few suggestions.

• See the operating instructions for the recorder about the details about copying and playing

back.

Copy by inserting the SD card into the recorder

Panasonic devices compatible with the respective file
format (such as a Blu-ray Disc recorder) can be used to
copy the images.

For details on compatible devices, refer to the support sites
below.

http://panasonic.jp/support/global/cs/dsc/

(This Site is English only.)

Some compatible devices may not be sold in certain countries and regions.

Summary of Contents for Lumix DMC-FX80












































































































































































Search results

Summary of Contents for Lumix DMC-FX80

Reviews:

Related manuals for Lumix DMC-FX80

Brands by name

Popular brands

Panasonic Lumix DMC-FX80, Operating Instructions Manual

Search results

Summary of Contents for Lumix DMC-FX80

Reviews:

Related manuals for Lumix DMC-FX80

Brands by name

Popular brands