- 23 -
Preparation
1
Press [MENU/SET].
2
Move
3
/
4
to select [CLOCK SET].
3
Move
1
and then perform steps
3
and
4
to set the clock.
4
Press [MENU/SET] to close the menu.
•
You can also set the clock in the [SETUP] menu.
Note
•
The clock is displayed when [DISPLAY] is pressed several times during recording.
•
When a fully charged battery has been inserted for more than 24 hours, charging of the built-in
battery for the clock is completed so the clock setting will be stored (in the camera) for at least
3 months even if the battery is removed. (If you insert a battery that is not sufficiently charged, the
length of time that the clock setting is stored may become less.)
•
You can set the year from 2000 to 2099. The 24-hour system is used.
•
If the clock is not set, the correct date cannot be printed when you stamp the date on the pictures
with [TEXT STAMP]
or order a photo studio to print the pictures.
•
If the clock is set, the correct date can be printed even if the date is not displayed on the screen of
the camera.
Changing the clock setting (In normal picture mode)
