Panasonic LUMIX DCG100VGNK Operating Instructions Manual Download Page 78

Page: 78 / 509

4. Recording mode

[AF Mode]

[AF Mode] is automatically set to [ ] ([Face/Eye Detection]).

• If you touch the subject, the camera switches to [ ] ([Tracking]) and the AF

tracking function starts operating.

– The AF tracking function will also work if you press [ ] ( ) and then press the

shutter button halfway.

• Each press of [ ] ( ) changes the AF mode.

• For information about AF modes, refer to page

131

and

133

Flash

When recording using a flash, the camera switches to the appropriate

flash mode for the recording conditions.

• When [

] or [

], Red-Eye Removal works.

• When Slow Sync. ([

], [

]), be careful with regard to camera shake

because the shutter speed becomes slow.

• In Intelligent Auto Plus Mode, you can set [Flash Mode] under [Flash] in the

[Rec] menu to [ ] (Forced Flash Off) even when the flash is open.

Summary of Contents for LUMIX DCG100VGNK






























































































































































































































































































































































































































































































































Search results

Summary of Contents for LUMIX DCG100VGNK

Reviews:

Panasonic LUMIX DCG100VGNK, Operating Instructions Manual, Page: 78 / 509

Search results

Summary of Contents for LUMIX DCG100VGNK

Reviews: