manualshive.com logo in svg

Panasonic LUMIX DCG100VGNK, Operating Instructions Manual, Page: 360 / 509

Share
Download
Panasonic LUMIX DCG100VGNK Operating Instructions Manual Download Page 360

360

13.  Menu Guide

[Playback] Menu

™

™

How to Select an Image(s) in the [Playback] menu

Follow the steps below when the image selection screen is displayed.

When [Single] has been selected

Press     to select the image.

Set

Set

Press  .

•  If [Set/Cancel] is displayed at the right 

bottom of the screen, the setting is 
canceled when 

 is pressed again.

When [Multi] has been selected

Press         to select the image and 

then press   (repeat).

•  The setting is canceled when 

 is 

pressed again.

2

3

4

5

6

1

OK

OK

Press [DISP.] to execute.

When a screen similar to the one on the right is displayed:

Press         to select the image, and 

then press   to set (repeat).

•  The setting is canceled when 

 is pressed 

again.

Set/Cancel

2

3

4

5

6

1

Summary of Contents for LUMIX DCG100VGNK






























































































































































































































































































































































































































































































































Reviews:

No comments