manualshive.com logo in svg

Panasonic LUMIX DCG100VGNK, Operating Instructions Manual, Page: 325 / 509

Share
Download
Panasonic LUMIX DCG100VGNK Operating Instructions Manual Download Page 325

325

13.  Menu Guide

[Multi Exp.]

[Start]

—

[Auto Gain]

 [ON]/[OFF]

[Overlay]

[ON]/   [OFF]

You can apply an effect equivalent to four 
exposures on a single image.

[Auto Gain]:

 Automatically adjusts brightness in 

accordance with image count.

[Overlay]:

 Allows multiple exposure for recorded 

RAW images. After selecting [Start], a selection 
screen for images to stack is displayed.

•  After selecting [Start], pressing the shutter 

button fully starts multiple exposure.

•  Preview is displayed for each recording, and the 

following operations are available:

 

– [Next] (You can also 

perform the same 
operation by pressing 
the shutter button 
halfway.)

 

– [Retake]

 

– [Exit]: Records the 

picture, and finishes 
multiple exposure 
recording.

Next

Retake

Exit

Summary of Contents for LUMIX DCG100VGNK






























































































































































































































































































































































































































































































































Reviews:

No comments