256
DVQP1242
Wi-Fi
Using “LUMIX CLUB”
Acquiring a new login ID ([New account])
→
[Setup
] → [
Wi-Fi
] → [
Wi-Fi Setup
] → [
LUMIX CLUB]
→ [
Set/Add Account
] → [
New account]
•Connect to the network. Proceed to the next page by selecting [Next].
•A confirmation screen will be displayed if a login ID has already been acquired for the
camera. Select [Yes] to acquire a new login ID, or [No] if you do not need to acquire a
new login ID.
1
Select the method for connecting to a wireless access point, and set
)
•The settings screen will only appear during the first connection. Connection methods set on this
unit are stored and will be used for subsequent connections. If you want to change the wireless
access point to connect to, press the [DISP.] button, then change the connecting destination.
•Proceed to the next page by selecting [Next].
2
Read through the “LUMIX CLUB” terms of use and select [Agree]
•You can press to switch pages.
•
Turn the zoom lever to the T side to enlarge the page display (x2 magnification).
•If you turn the zoom lever to the W side after enlarging the page, the page returns to its original
size (no magnification).
•You can use to move the position of the area to be enlarged.
•Press [Q.MENU/ ] button to cancel the process without acquiring a login ID.
3
Enter the password
•Enter any combination of 8 to 16 characters and numbers for the password.
•For details on how to enter characters, refer to “Entering Text”
(→
4
Check the login ID and select [OK]
•
The login ID (12-digit number) will be displayed automatically.
When logging in to the “LUMIX CLUB” with a computer, you only need to enter the numbers.
•A message is displayed when the connection is complete. Select [OK].
•Be sure to make a note of the login ID and password.
