167
Using Menu Functions
Menu list
About RAW file
In RAW file format the data is saved without any picture processing by the camera. To play back and
edit RAW file pictures, you must use this unit or dedicated software.
•You can develop the RAW file pictures using [RAW Processing] in the [Playback] menu.
•To develop and edit RAW file pictures on a PC, use the software (Ichikawa Soft Laboratory’s
“SILKYPIX Developer Studio”). To get this software, download it from the supplier’s website and
install it on your PC.
(→
●
A RAW still picture is always recorded at [3:2] (5472×3648).
●
If you delete a picture recorded in [
] or [
] from the camera, the corresponding RAW and
JPEG pictures are also deleted.
●
When you play back a picture recorded with [ ], the grey area is displayed according to the
aspect ratio of the picture during recording.
●
The setting is fixed to [ ] when recording 4K photos or recording in [Post Focus].
●
You cannot set to [
], [
] or [ ] in the following cases:
•Panorama Shot Mode
•[Handheld Night Shot] (Scene Guide Mode)
[Photo Style]
Recording mode:
You can adjust the colours and picture quality according to the concept of the picture that
you want to create.
→
[Rec
] → [
Photo Style]
[Standard]
Standard setting.
[Vivid]
*
Setting with slightly high contrast and saturation.
[Natural]
*
Setting with slightly low contrast.
[Monochrome]
Setting that creates a picture using monochrome shades of grey only,
such as black and white.
[L.Monochrome]
*
Setting that creates a monochrome picture using rich shades of grey
with deep solid black tones.
[Scenery]
*
Setting that creates a picture using vivid colours for the blue sky and
green.
[Portrait]
*
Setting that produces the look of a healthy complexion.
[Custom]
*
Setting for using colours and picture quality that were registered in
advance.
*
This setting is not available in Intelligent Auto Plus Mode.
