129
4K Photo and Drive Settings
Taking Pictures While Adjusting a Setting Automatically (Bracket Recording)
Aperture Bracket
Recording mode:
■
About [More Settings] (step
2
in
(→
)
[Image Count]
[3]:
Takes a specified number of pictures with different aperture values
within the range based on the initial aperture value.
[ALL]:
Takes pictures using all aperture values.
•When using burst recording, if you press and hold the shutter button, recording will be
performed until a specified number of pictures are taken.
Example:
3.3 4
5.6
8
When the initial position is set to F4:
first picture, second picture, third picture, fourth picture
Focus Bracket
■
About [More Settings] (step
2
in
(→
)
[Step]
Sets the interval between focus positions.
[Image Count]
*
Sets the number of pictures to be taken.
[Sequence]
[0/–/+]:
Takes pictures with different focus positions within the range
based on the initial focus position.
[0/+]:
Takes pictures with different focus positions toward the far side
based on the initial focus position.
*
Not available for burst recording. When using burst recording, if you press and hold the shutter
button, recording will be performed continuously until a specified number of pictures are taken.
[Sequence]: Example when [0/–/+] is selected [Sequence]: Example when [0/+] is selected
Close-up
Infinity
first picture, second picture... fifth picture...
●
Pictures taken with Focus Bracket are displayed as a set of group pictures.
