Panasonic LUMIX DC-LX100M2, Operating Instructions Manual, Page: 99 / 309

99
5. 4K Photo and Drive Settings
Taking Pictures using Burst Mode
Applicable modes:
Pictures are taken continuously while the shutter button is pressed.
1
Press [ ] (
4
).
2
Press
2
/
1
to select the burst icon ([ ],
etc.), and then press 3 .
3
Select the burst speed with
2
/
1
, and then
press [MENU/SET].
4
Focus on the subject and take a picture.
• Hold down the shutter button fully to activate the Burst
Mode.
∫
Cancelling the Burst Mode
Select [ ] ([Single]) or [ ] from among the drive modes. (P98)
∫
Notes on Burst Mode settings
¢
When recording is performed under the test conditions specified by Panasonic.
The burst speed will become slower halfway. However, pictures can be taken until the
capacity of the card becomes full. Depending on recording conditions, the number of burst
pictures that can be taken will be reduced.
[H] Performs high-speed burst recording.
[M] Performs medium-speed burst recording.
[L] Performs low-speed burst recording.
[H]
(High speed)
[M]
(Middle speed)
[L]
(Low speed)
Burst speed
(pictures/second)
AFS/MF 11 7
2
AFF/AFC 5.5 5.5
Live View during
Burst Mode
AFS/MF None
Available Available
AFF/AFC Available
Number of
recordable
pictures ¢
With RAW files 32 or more
Without RAW files 100 or more
L
4:3
AFS AFS