Panasonic LUMIX DC-LX100M2 Operating Instructions Manual Download Page 61

Page: 61 / 309

3. Recording Modes

Recording Mode:

∫

Setting colour

Press [

] (

Rotate the control dial to adjust colour.

• To return to the recording screen, press [MENU/SET].
• The colour setting will return to the default level (centre

point) when this unit is turned off or the camera is switched
to another Recording Mode.

∫

Taking a picture with a blurred background (Defocus
Control)

Press [Fn3] to display the setting screen.

Set the blurriness by rotating the control dial.

• To return to the recording screen, press [MENU/SET].
• To cancel the setting, press [Fn3].
• Auto Focus Mode is set to [

The position of the AF area can be set by touching the
screen. (Its size cannot be changed)

∫

Setting brightness

• You can rotate the exposure compensation dial to set the brightness.

(P91)

Change the settings by using the touch screen

Touch [

Touch the item you want to set.
[

]: Colour tone

[

]: Defocus control

[

]: Brightness

It is displayed when [Exposure Comp.] is set in a function
button.

(P50)

Drag the slide bar to set.
• To return to the recording screen, press [MENU/SET].

Taking pictures with customised colour, defocus control, and
brightness settings

250 125 60

2.8

2.0

4.0 5.6

Summary of Contents for LUMIX DC-LX100M2






















































































































































































































































































































Search results

Summary of Contents for LUMIX DC-LX100M2

Reviews:

Panasonic LUMIX DC-LX100M2, Operating Instructions Manual, Page: 61 / 309

Search results

Summary of Contents for LUMIX DC-LX100M2

Reviews: