Panasonic LUMIX DC-LX100M2 Operating Instructions Manual Download Page 31

Page: 31 / 309

2. Getting Started/Basic Operations

• Continuous motion picture recordable times

Motion picture recording stops when the continuous recordable times below have elapsed.

You can continue recording without interruption.

[Rec

Format]

[Rec Quality]

Continuous

recordable time

Size interval for dividing files

[AVCHD]

[FHD/28M/50p]

29 minutes and
59 seconds

Files exceeding 4 GB in size will be
divided into smaller files for recording.

[FHD/17M/50i]

[FHD/24M/25p]

[FHD/24M/24p]

[MP4]

[4K/100M/30p]

15 minutes

When an SDHC card is used:

Files

exceeding 4 GB in size will be divided into
smaller files for recording and playback.

When an SDXC card is used:

Files are

not divided for recording.

[4K/100M/25p]

[4K/100M/24p]

[FHD/28M/60p]

29 minutes and
59 seconds

Files exceeding 4 GB in size will be
divided into smaller files for recording and
playback.

[FHD/28M/50p]

[FHD/20M/30p]

[FHD/20M/25p]

[HD/10M/30p]

[HD/10M/25p]

• Depending on the recording conditions and the type of card, the number of recordable

pictures and available recording time vary.

• The maximum available continuous recording time is displayed on the screen.

• [9999

] is displayed on the recording screen if there are 10000 or more recordable pictures

remaining.

Summary of Contents for LUMIX DC-LX100M2






















































































































































































































































































































Search results

Summary of Contents for LUMIX DC-LX100M2

Reviews:

Panasonic LUMIX DC-LX100M2, Operating Instructions Manual, Page: 31 / 309

Search results

Summary of Contents for LUMIX DC-LX100M2

Reviews: