Panasonic LUMIX DC-LX100M2 Operating Instructions Manual Download Page 250

Page: 250 / 309

11. Using the Wi-Fi/Bluetooth function

250

∫

Changing the settings for sending images

After the connection is established, you can change the send settings by pressing [DISP.].

[Size]

Resize the image to send.

[Original]/[Auto]/[Change] ([M], [S] or [VGA])

• You can set this to [Auto] if the destination is [Web service].

It changes the image size according to the status of the destination.

[File Format]

(Destination:
[Smartphone], [PC])

[JPG]/[RAW

JPG]/[RAW]

[Delete Location
Data]

(Destination: [Cloud Sync.
Service], [Web service])

Deletes the location information from images before sending them.

[ON]/[OFF]

[Cloud Limit]

(Destination: [Cloud Sync.
Service])

Sets the operation to be performed when the Cloud Folder runs out of
free space.

[ON]:

Do not send images.

[OFF]:

Delete images from the oldest ones, then send new images.

Summary of Contents for LUMIX DC-LX100M2






















































































































































































































































































































Search results

Summary of Contents for LUMIX DC-LX100M2

Reviews:

Panasonic LUMIX DC-LX100M2, Operating Instructions Manual, Page: 250 / 309

Search results

Summary of Contents for LUMIX DC-LX100M2

Reviews: