Panasonic LUMIX DC-LX100M2 Operating Instructions Manual Download Page 20

Page: 20 / 309

2. Getting Started/Basic Operations

Slide the release lever

to the [OPEN]

position and open the card/battery door.

Insert the battery

all the way in until

you hear a locking sound, and then
confirm that it is locked by the lever

• Check the orientation of the battery.

Close the card/battery door and slide the
release lever to the [LOCK] position.

∫

To remove

Pull the lever

in the direction of the arrow to

remove.

Inserting the battery

• Turn the camera off and wait for the “LUMIX” display on the monitor to clear before removing

the battery. (Otherwise, this unit may no longer operate normally and the card itself may be
damaged or the recorded pictures may be lost.)

• Remove the battery after use.

Summary of Contents for LUMIX DC-LX100M2






















































































































































































































































































































Search results

Summary of Contents for LUMIX DC-LX100M2

Reviews:

Panasonic LUMIX DC-LX100M2, Operating Instructions Manual, Page: 20 / 309

Search results

Summary of Contents for LUMIX DC-LX100M2

Reviews: