Panasonic LUMIX DC-LX100M2 Operating Instructions Manual Download Page 162

Page: 162 / 309

8. Recording Motion Pictures

162

Applicable modes:

The sound recording level is displayed on the recording screen.

Settings: [ON]/[OFF]

Applicable modes:

Adjust the sound input level to 4 different levels (

12 dB to

6 dB).

• Displayed dB values are approximate.

Displaying/setting the sound input level

[Sound Rec Level Disp.]

[Motion Picture]

[Sound Rec Level Disp.]

Not available in these cases:

• [Sound Rec Level Disp.] is fixed to [OFF] in the following case:

– When using [Miniature Effect] in [Filter Settings]

[Sound Rec Level Adj.]

[Motion Picture]

[Sound Rec Level Adj.]

Not available in these cases:

• [Sound Rec Level Adj.] does not work in the following case:

– When using [Miniature Effect] in [Filter Settings]

Summary of Contents for LUMIX DC-LX100M2






















































































































































































































































































































Search results

Summary of Contents for LUMIX DC-LX100M2

Reviews:

Panasonic LUMIX DC-LX100M2, Operating Instructions Manual, Page: 162 / 309

Search results

Summary of Contents for LUMIX DC-LX100M2

Reviews: