215
Using Menu Functions
Menu list
→
[Custom
] →
[Monitor / Display]
[Live View Boost]
The screen is displayed bright so that you can check the composition in low-light
environment such as at night.
•Select [SET] to specify the Recording Mode in which [Live View Boost] will be enabled.
●
Noise may be more noticeable in the screen than in the recorded image.
●
This function is disabled in the following cases:
•When adjusting the exposure (when the shutter button is pressed halfway, for example)
•When recording a motion picture or 4K photo
•When an image effect in [Filter Effect] of [Filter Settings] is set
•When using [Constant Preview]
[Peaking]
When you perform Manual Focus operation, this function automatically adds colour to the
portions of the image that are in Focus (portions on the screen with clear outlines).
●
When [Detect Level] in [SET] is set to [HIGH], portions to be highlighted are reduced, allowing you
to achieve a more precise focus.
●
Changing the [Detect Level] setting also changes the [Display Color] setting as follows.
[Detect Level]
[HIGH]
[LOW]
[Display Color]
[ ] (Light blue)
[ ] (Blue)
[ ] (Yellow)
[ ] (Orange)
[ ] (Yellow Green)
[ ] (Green)
[ ] (Pink)
[ ] (Red)
[ ] (White)
[ ] (Grey)
●
Each time [
] in [ ] is touched, the setting is switched in order of [
] ([Detect Level]:
[LOW
]) → [
] ([Detect Level]: [HIGH
]) → [
OFF].
●
[Peaking] is not available when using [Live View Boost].
●
This function is not available in the following case:
•[Rough Monochrome] (Creative Control Mode)