Panasonic Lumix DC-GX9 Operating Instructions Manual Download Page 194

Page: 194 / 343

194

Using Menu Functions

Menu list

■

Registering the setting for the adjusted picture quality to [Custom]

Perform the picture quality adjustment in Step of “Adjusting the picture quality” and

press the [DISP.] button

●

The [Grain Effect] setting is not applied to the recording screen.

●

[Grain Effect] is not available in the following cases.

•Panorama Shot Mode

•When recording motion pictures

•When recording 4K photos

•When recording using [Post Focus]

[Filter Settings]

Recording mode:

You can apply picture effects (filters) that are available for Creative Control Mode to

images in other modes, such as Aperture-Priority AE Mode or Panorama Shot Mode.

(→

83)

→

[Rec

] → [

Filter Settings

] → [

Filter Effect]

Settings: [ON] / [OFF] / [SET]

■

With touch screen operations

Touch [ ]

Touch the item you want to set

[ ]: Picture effects ON or OFF

[ ]: Picture effects (Filter)

[ ]: Adjusting the picture effect

Summary of Contents for Lumix DC-GX9
























































































































































































































































































































































Search results

Summary of Contents for Lumix DC-GX9

Reviews:

Panasonic Lumix DC-GX9, Operating Instructions Manual, Page: 194 / 343

Search results

Summary of Contents for Lumix DC-GX9

Reviews: