Panasonic Lumix DC-GX9 Operating Instructions Manual Download Page 183

Page: 183 / 343

183

Playing Back and Editing Pictures

Switching the Playback Method

Zooming in and viewing “Playback Zoom”

Rotate the rear dial to the right

Current zoom position

•Each time you rotate the rear dial to the right, the magnification

increases through four levels: 1x, 2x, 4x, 8x, and 16x.

Operation

Touch

operation

Description

—

Enlarges/reduces the screen in large

steps.

—

Pinch out /

Pinch in

Enlarges/reduces the screen in small

steps.

Drag

Moves the enlarged area (during

enlarged display).

—

Forwards/rewinds a picture while

maintaining the same zoom

magnification and zoom position

(during Playback Zoom).

•You can also zoom in by quickly touching the display twice.

(If the display was enlarged, it returns to the same magnification

ratio.)

Viewing a list of pictures “Multi Playback”

Rotate the rear dial to the left

•Rotate the rear dial to the left to switch the display methods in

the following order: 1-picture screen (full-screen) → 12-picture

screen → 30-picture screen → Calendar screen. (Rotate the dial

to the right to return.)

•It is possible to switch the playback screen by touching the

following icons.

– [ ]: 1-picture screen

– [ ]: 12-picture screen

– [ ]: 30-picture screen

– [ ]: Calendar screen

(→

184)

•The screen can be switched gradually by dragging the screen up

or down.

•When you select a picture using the cursor button and press

[MENU/SET] on the 12-picture or 30-picture screen, the selected

picture is displayed on the 1-picture screen (full-screen). (When

you select a motion picture, it is automatically played back.)

●

Pictures displayed with [!] cannot be played back.

Summary of Contents for Lumix DC-GX9
























































































































































































































































































































































Search results

Summary of Contents for Lumix DC-GX9

Reviews:

Panasonic Lumix DC-GX9, Operating Instructions Manual, Page: 183 / 343

Search results

Summary of Contents for Lumix DC-GX9

Reviews: