Panasonic Lumix DC-GX9 Operating Instructions Manual Download Page 108

Page: 108 / 343

108

Focus, Brightness (Exposure) and Colour tone Settings

Taking pictures with Manual Focus

Recording mode:

Manual Focus is convenient when you want to lock the focus to take pictures or when it is

difficult to adjust focus using Auto Focus.

Set the focus mode lever to [MF]

Press [ ] button ( )

Press to adjust the focus

position, and press [MENU/SET]

•The screen changes to the assist screen and an

enlarged display appears. (MF Assist)

You can move the enlarged part by dragging the

screen.

•You can also enlarge the area by performing one of

the following operations:

– Rotating the focus ring

– Moving the focus lever

– Pinching out or touching the screen twice

•To return the focus position to the centre, press [DISP.] button.

Adjust the focus

The operations used to focus differ depending on the lens.

When using an interchangeable lens (H-FS12032) with no focus ring

Press :

Focuses on nearby subject

Press :

Focuses on distant subject

Slide bar

•These operations are possible only on the focus

adjustment screen.

•Pressing and holding will increase the focus

speed.

•Focus can also be adjusted by dragging the slide

bar.

Summary of Contents for Lumix DC-GX9
























































































































































































































































































































































Search results

Summary of Contents for Lumix DC-GX9

Reviews:

Panasonic Lumix DC-GX9, Operating Instructions Manual, Page: 108 / 343

Search results

Summary of Contents for Lumix DC-GX9

Reviews: