2. Getting Started/Basic Operations
32
Attaching/Removing the Lens
By changing the lens, you will increase your picture taking-options and further your
enjoyment of the camera.
• Check that the camera is turned off.
• When attaching or detaching the interchangeable lens (H-FS12032/H-FS35100), retract the
lens barrel.
• Change lenses where there is not a lot of dirt or dust. Refer to
when dirt or dust gets on
the lens.
• Attach the lens cap.
While pressing on the lens release button
A
,
rotate the lens toward the arrow until it stops
and then remove.
• Hold the part around the base of the lens to rotate it.
• When the lens is removed from the camera body, make sure to attach the body cap to the
camera body and attach the lens rear cap to the lens.
• If the lens rear cap is fitted to the lens, remove it.
• If the body cap is fitted to the camera, remove it.
Align the lens fitting marks
B
and then rotate the lens in the direction of the arrow
until it clicks.
• Do not press the lens release button
C
when you attach a lens.
• Do not try to attach the lens when holding it at an angle to the camera body as the lens mount
may get scratched.
Detaching the lens
Attaching the lens