Panasonic Lumix DC-GX880 Operating Instructions For Advanced Features Download

Page: 123 / 330

123

5. 4K Photo and Drive Settings

Audio is not played back when you perform playback with the camera.

Record a 4K photo.

[

]

[4K Burst]

For capturing the best shot of a
fast-moving subject

(e.g., sports, aeroplanes, trains)
Audio recording: Not available

[

]

[4K Burst(S/S)]

“S/S” is an

abbreviation of

“Start/Stop”.

For capturing unpredictable photo
opportunities

(e.g., plants, animals, children)
Audio recording: Available

[

]

[4K Pre-Burst]

For recording as needed whenever a
photo opportunity arises

(e.g., the moment when a ball is thrown)
Audio recording: Not available

[

]

[4K Burst

(Wide-angle)]

A 4K Photo Mode for taking selfies with an angle of view wider
than that of [4K Burst]

• This can only be set in Self Shot Mode. In other modes, the setting

changes to [4K Burst].

• Refer to “Taking pictures of yourself in 4K Photo Mode ([4K Burst

(Wide-angle)])” on

P68

for details.

[

]

[4K Burst]

Press the shutter button
halfway.

Press and hold

Recording is performed

Press and hold the shutter
button fully for as long as you
want to perform recording.

• Press the button fully slightly in advance. Recording starts

approximately 0.5 seconds after it has been pressed fully.

• If you are using Auto Focus, [Continuous AF] will work during

recording. Focus will be adjusted continuously.

• If you remove your finger from the shutter button immediately

after the start of recording, up to a period of approximately
1.5 seconds after the moment that the finger has been
removed may be recorded.





Summary of Contents for Lumix DC-GX880











































































































































































































































































































































Search results

Summary of Contents for Lumix DC-GX880

Reviews:

Related manuals for Lumix DC-GX880

Brands by name

Popular brands

Panasonic Lumix DC-GX880, Operating Instructions For Advanced Features

Search results

Summary of Contents for Lumix DC-GX880

Reviews:

Related manuals for Lumix DC-GX880

Brands by name

Popular brands