47
2. Getting Started/Basic Operations
∫
Setting the operation methods of the front dial and rear dial
Rotating the control dial:
Selection of items or setting of values etc., is performed.
• The operation of rotating the control dial is illustrated as below in
this owner’s manual.
Example: When rotating the control dial to the left or right:
>
[Custom]
>
[Operation]
>
[Dial Set.]
[Assign Dial (F/SS)]
Assigns the operations of the aperture value and shutter speed
in Manual Exposure Mode.
[
F
SS]:
Assigns the aperture value to the front dial, and the shutter
speed to the rear dial.
[
SS
F]:
Assigns the shutter speed to the front dial, and the aperture
value to the rear dial.
[Rotation (F/SS)]
Changes the rotation direction of the dials for adjusting the
aperture value and shutter speed.
[
]/[
]
[Exposure Comp.]
Assigns the Exposure Compensation to the front dial or rear
dial so that you can directly adjust it.
[
]
(Front Dial)
/[
]
(Rear Dial)
/[OFF]
[Dial Operation Switch
Setup]
Sets the items to be assigned temporarily to the front/rear dials
when you press the function button to which [Dial Operation
Switch] is assigned.
[
]
([Front Dial Operation])
/[
]
([Rear Dial Operation])
• Items that can be set are as follows.
– [Filter Effect]
– [Aspect Ratio]
– [AF Mode]
– [6K/4K PHOTO]
– [i.Resolution]
– [Flash Mode]
– [Flash Adjust.]
– [Sensitivity]
• [Highlight Shadow] uses the two dials.
Control Dial
MENU
