4. Focus, Brightness (Exposure) and Color tone Settings
100
Applicable modes:
∫
Optimizing the focus for the touched position ([AF])
1
Touch the subject.
2
(When [
]/[
]/[
]/[
]/[
] is set)
Touch [Set].
• (When [
]/[
]/[
] is set) The AF area setting is cleared if you touch [
].
∫
Optimizing the focus and brightness for a touched position ([AF+AE])
1
Touch the subject you want to optimize the
brightness for.
• The brightness optimization position is displayed on the
center of the AF area. The position follows the movement
of the AF area.
• [Metering Mode] is set to [
], which is used exclusively
for the Touch AE.
• Touching [Reset] returns the brightness optimization
position and the AF area to the center.
2
Touch [Set].
• The AF area with the same function as [
Ø
] is displayed on the touched position.
• Touching [
] (or [
] when [
Ø
] is selected) will cancel the [AF+AE] setting.
• When recording with the Touch Shutter, the focus and brightness are optimized for the
touched position before recording takes place.
Specifying the AF area position with the Touch Function
>
[Custom]
>
[Operation]
>
[Touch Settings]
>
[Touch AF]
[AF]
Optimizes the focus for the touched subject.
[AF+AE]
Optimizes the focus and brightness for the touched subject.
[OFF]
—
([Face/Eye
Detection])
The AF area moves to the subject and the size and position setting
screen is displayed.
([Tracking])
The touched subject is locked.
([225-Area])
The AF area moves to the subject and the size and position setting
screen is displayed.
, etc.
([Custom Multi])
The AF area moves to the subject and the appropriate setting
screen is displayed.
([1-Area])
The AF area moves to the subject and the size and position setting
screen is displayed.
([Pinpoint])
The AF area moves to the subject and the setup screen for the
enlarged area is displayed.
MENU
ュリヴヱハ
5HVHW
6HW
AE