![Panasonic LUMIX DC-G9M2 Operating Instructions Manual Download Page 54](http://html1.mh-extra.com/html/panasonic/lumix-dc-g9m2/lumix-dc-g9m2_operating-instructions-manual_3521558054.webp)
Getting Started – Charging the Battery
54
•
To recover from [Sleep Mode], [Sleep Mode(Wi-Fi)], or [Power Save LVF Shooting],
perform one of the following operations:
– Press the shutter button halfway.
– Set the camera on/off switch to [OFF] and then [ON] again.
•
To recover from [Auto LVF/Monitor Off], press any button.
[Sleep Mode]
Sets the amount of time until the camera is put to sleep.
[Sleep
Mode(Wi-Fi)]
Sets the camera to sleep 15 minutes after being disconnected
from Wi-Fi.
[Auto LVF/
Monitor Off]
Sets the amount of time it takes for the viewfinder/monitor to turn
off.
(The camera is not turned off.)
[Power Save
LVF Shooting]
Puts the camera to sleep when the recording screen is being
displayed on the monitor when automatic viewfinder/monitor
switching is active.
[Time to Sleep]
Sets the amount of time until the camera is
put to sleep.
[Method of
Activation]
Sets the screen where the camera is put to
sleep.
[Only Control Panel]
: Puts the camera to
sleep only when the control panel (
[While Recording Standby]
: Puts the
camera to sleep from any screen during
recording standby.