Panasonic LUMIX DC-G95D Owner'S Manual For Advanced Features Download Page 66

Page: 66 / 338

3. Recording Modes

The camera detects scenes automatically (Scene Detection)
(

: When taking pictures,

: When recording motion pictures)

∫

Switching between Intelligent Auto Plus Mode and Intelligent Auto Mode

Select the menu.

Press

to select [

] or [

] and then press [MENU/SET].

Intelligent Auto Plus Mode allows you to adjust the settings below while also using
Intelligent Auto Mode for other settings.

[i-Portrait]

[i-Scenery]

[i-Macro]

[i-Night Portrait]

[i-Night Scenery]

[iHandheld Night

Shot]

[i-Food]

[i-Baby]

[i-Sunset]

[i-Low Light]

1 Displayed when a flash is used.

2 Only displayed when [iHandheld Night Shot] is set to [ON].

3 Displayed when persons under 3 years old registered in the

camera with the Face Recognition function are detected.

• [

] is set if none of the scenes are applicable, and the standard

settings are set.

• When recording is performed with the 4K Photo or Post Focus

function, Scene Detection works in the same way as when motion
picture is recorded.

[Intelligent Auto]

[Intelligent Auto Mode]

It is also possible to display the selection screen by touching the
Recording Mode icon in recording screen.

Intelligent Auto Plus Mode

Intelligent Auto Mode

Setting the brightness

—

Setting the color tone

—

Defocus Control

—

Menus that can be set

Many

Few

Summary of Contents for LUMIX DC-G95D



















































































































































































































































































































































Search results

Summary of Contents for LUMIX DC-G95D

Reviews:

Brands by name

Popular brands

Panasonic LUMIX DC-G95D, Owner'S Manual For Advanced Features

Search results

Summary of Contents for LUMIX DC-G95D

Reviews:

Brands by name

Popular brands