2. Getting Started/Basic Operations
48
Pressing the cursor button:
Selection of items or setting of values etc., is performed.
• This owner’s manual expresses the up, down, left, and right of
the cursor button as
3
/
4
/
2
/
1
.
Pressing [MENU/SET]:
Confirmation of setting contents, etc., is performed.
• Displays the menu during recording and playback.
Press [DISP.].
• The display information is switched.
[Exposure Comp.]
Assigns exposure compensation operation to the front/rear
dial. (Except in Manual Exposure Mode)
[
]
(Front Dial)
/[
]
(Rear Dial)
/[OFF]
[Dial Operation Switch
Setup]
Sets the items to be assigned temporarily to the front/rear dials
when you press the Fn button to which [Dial Operation Switch]
is assigned.
[
]
([Front Dial Operation])
/[
]
([Rear Dial Operation])
• Items that can be set are as follows.
– [Photo Style]
– [Filter Effect]
– [Aspect Ratio]
– [4K PHOTO]
– [Highlight Shadow]
– [i.Dynamic]
– [i.Resolution]
– [Flash Mode]
– [Flash Adjust.]
– [Sensitivity]
– [White Balance]
– [AF Mode]
• [Highlight Shadow] uses the two dials.
Cursor buttons/[MENU/SET] button
[DISP.] button (switching the information display)
