5. 4K Photo and Drive Settings
128
Selecting pictures from 4K burst file
1
Select an image with the [
] icon on the playback
screen, and press
3
.
• You can also perform the same operation by touching the icon [
].
• If the image was recorded with [4K Pre-Burst], proceed to step
3
.
3
Drag the frames to select the frame you want
to save as a picture.
• You can also perform the same operation by pressing
2
/
1
.
• To continuously rewind/forward frame-by-frame, touch
and hold [
]/[
].
4
Touch [
] to save the picture.
• The picture will be saved in JPEG format.
∫
[4K PHOTO Bulk Saving]
You can save any 5-second period of pictures from a 4K burst file all at once.
1
Select the menu.
2
Press
2
/
1
to select the 4K photo burst files and press [MENU/SET].
• If the burst time is 5 seconds or less, all frames will be saved as pictures.
3
Select the first frame of the pictures to be saved at once.
• Select the frame in the same way as you select pictures from a 4K burst file.
• Pictures will be saved as a group of Burst Mode pictures in JPEG format.
2
Drag the slide bar to make a rough selection
of scenes.
• For information on how to use the slide view screen, refer
.
• You can select its scenes on the 4K burst playback
screen by touching [
] (Fn1).
• Touching [
] allows you to switch to the marker
operation screen.
Slide view screen
• The picture will be saved with recording information (Exif information), including its shutter
speed, aperture and ISO sensitivity information.
• 4K burst files saved on a PC will be treated as MP4 motion pictures.
>
[Playback]
>
[4K PHOTO Bulk Saving]
Fn1
AUTO
MODE
AUTO
AUTO
AUTO
MENU
