Panasonic Lumix DC-G9 Operating Instructions For Advanced Features Download Page 223 | Manualshive

Page: 223 / 342

Panasonic Lumix DC-G9 Operating Instructions For Advanced Features Download Page 223

223

9. Using Menu Functions

[Economy]

[Sleep Mode]

The camera is automatically turned off if the camera has not been used for
the time selected on the setting.

[Sleep

Mode(Wi-Fi)]

The camera is automatically turned off if it is not connected to a Wi-Fi
network and has not been used for 15 minutes (approx.).

[Auto LVF/

Monitor Off]

The monitor/viewfinder is automatically turned off if the camera has not
been used for the time selected on the setting.

[Power Save LVF

Shooting]

If you display the monitor using the viewfinder/monitor automatic switching
function, the camera will turn off automatically after being left idle.

[Time]

Sets the amount of time before the camera turns off
automatically.

[10SEC]/[5SEC]/[3SEC]/[2SEC]/[1SEC]/[OFF]

• When not using [Power Save LVF Shooting], select [OFF].

[Display]

Sets whether to turn off the camera automatically only while the
[Monitor Info. Disp.] screen is displayed or while any screen is
displayed.

[Only Monitor Info.]:

Sets the camera to turn off automatically only when [Monitor
Info. Disp.] is displayed.

[All Live View]:

Sets the camera to turn off automatically when any screen is
displayed.

• To cancel [Sleep Mode], [Sleep Mode(Wi-Fi)] or [Power Save LVF Shooting], perform either of

the following operations:
– Press the shutter button halfway.
– Turn off and on the camera.

• To turn the monitor/viewfinder on again, press any button.
• [Economy] does not work in the following cases.

– When connecting to a PC or a printer
– When recording or playing back motion pictures
– During a slide show
– When recording with [6K/4K Pre-Burst]
– When recording in [Multi Exp.]
– When using [Time Lapse Shot]
– When using [Stop Motion Animation] (only when [Auto Shooting] is set)
– When using the HDMI output during recording

• When using the AC adaptor (optional), [Sleep Mode], [Sleep Mode(Wi-Fi)] and [Power Save

LVF Shooting] are disabled.

• When using the AC adaptor (optional), [Auto LVF/Monitor Off] is fixed to [5MIN.].

«
...
221
222
223
224
225
...
»

Summary of Contents for Lumix DC-G9























































































































































































































































































































































Reviews:

No comments