Panasonic Lumix DC-G9 Operating Instructions For Advanced Features Download Page 222

Page: 222 / 342

9. Using Menu Functions

222

This enables/disables the WIRELESS connection lamp.
If you select [OFF], they will not light/flash.

This allows you to set the electronic sound and the electronic shutter sound.

Settings: [Beep Volume]/[E-Shutter Vol]/[E-Shutter Tone]

[Wi-Fi]

[Wi-Fi Function]

[Wi-Fi Setup]

[Bluetooth]

[Location Logging]

[Remote Wakeup]

[Auto Clock Set]

[Auto Transfer]

[Wi-Fi network

settings]

P265

[Wireless Connection Lamp]

[Beep]

• When [Silent Mode] is set to [ON], [Beep Volume] and [E-Shutter Vol] are set to [OFF].

Summary of Contents for Lumix DC-G9























































































































































































































































































































































Search results

Summary of Contents for Lumix DC-G9

Reviews:

Panasonic Lumix DC-G9, Operating Instructions For Advanced Features, Page: 222 / 342

Search results

Summary of Contents for Lumix DC-G9

Reviews: