Panasonic Lumix DC-G9 Operating Instructions For Advanced Features Download Page 215

Page: 215 / 342

215

9. Using Menu Functions

Display the exposure meter.

When you set the focus manually, an MF guide that allows
you to check the direction to achieve focus is displayed.

Indicator for

(infinity)

Display the recording information screen.

(P50

316)

This changes the angle of view during motion picture recording and still picture recording.

This will switch display between the number of recordable pictures and available recording
time.

Display a selection screen when you set the mode dial to [

[Expo.Meter]

• Set to [ON] to display the Exposure meter when performing

Programme Shift, setting aperture, and setting shutter speed.

• Unsuitable areas of the range are displayed in red.
• When the Exposure meter is not displayed, switch the display

information for screen by pressing [DISP.].

• If no operations are performed for approximately 4 seconds, the Exposure meter disappears.

[MF Guide]

[Monitor Info. Disp.]

[Rec Area]

Displays the recording area according to the angle of view for still picture
recording.

Displays the recording area according to the angle of view for motion picture
recording.

• The recording area indicated is an approximation.

Not available in these cases:

• When recording with the 6K/4K Photo function or Post Focus function, [Rec Area] is fixed to

[

[Remaining Disp.]

[Menu Guide]

4.0

250 125 60

4.0

2.8

5.6 8.0

Summary of Contents for Lumix DC-G9























































































































































































































































































































































Search results

Summary of Contents for Lumix DC-G9

Reviews:

Panasonic Lumix DC-G9, Operating Instructions For Advanced Features, Page: 215 / 342

Search results

Summary of Contents for Lumix DC-G9

Reviews: