Panasonic Lumix DC-FT7 Operating Instructions Manual Download

Page: 110 / 200

7. Recording Motion Pictures

110

Applicable modes:

You can record motion pictures in approximately 1/4

slow motion by performing

high-speed recording at 100 frames/second. The motion is displayed slower during
playback.
• Recording will be performed at [HD/10M/25p].

Select the menu.

Start recording by pressing the motion picture button.

Stop the recording by pressing the motion picture button again.

Recording slow motion pictures ([High Speed Video])

[Motion Picture]

[High Speed Video]

[ON]

• Audio is not recorded.
• You can continuously record a High Speed Video up to 7 minutes and 29 seconds or the file

size of 4 GB.

• Under fluorescent lighting, flicker or horizontal bars may be seen.

Not available in these cases:

• This function is not available in the following case:

– [Miniature Effect] (Creative Control Mode)

Summary of Contents for Lumix DC-FT7









































































































































































































Search results

Summary of Contents for Lumix DC-FT7

Reviews:

Related manuals for Lumix DC-FT7

Brands by name

Popular brands

Panasonic Lumix DC-FT7, Operating Instructions Manual

Search results

Summary of Contents for Lumix DC-FT7

Reviews:

Related manuals for Lumix DC-FT7

Brands by name

Popular brands