Panasonic LP-V Series, Operation And Maintenance Manual

Page: 217 / 334

217
4-11-2 Detail Adjustment (Laser Setting)
1
5
2
6
3
7 4
The following fine adjustments are allowed.
Description
1 Edge (Edge Adjustment) :
Adjust the edge of line in the character to be marked.
Though setting a small value here can shorten the marking time, the line edge becomes dull.
Setting large value makes the edge thick.
Setting Range 0 to 100
Initial Value 0
Round Edge Dark (Deep) Edge Proper
Small Large
2 Curve (Curve Adjustment) :
The shape of curve line in the character to be marked is adjusted.
Though setting a small value here can shorten the marking time, the curve line is distorted.
Setting large value makes the edge thick.
Setting Range 0 to 100
Initial Value 0
Curve Line Distorted Dark (Deep) Line Proper
Small Large
3 Waiting Time (Waiting Time Adjustment) :
Adjusts the waiting time for starting radiation at the start point of each line.
Apply to all line segment.
Setting a large value improves the marking disorder.
Too large value, however, makes the marking time longer.
Setting Range 0 to 100
Initial Value 0
ME-LP400V-OP-6