Panasonic LP-RH Series, Setup And Maintenance Manual

Page: 198 / 240

198
7-5 Disposal of Laser Marker
To dispose of the laser marker, in accordance with the regional regulation, please request the industrial waste disposer.
Dispose of the laser marker as industrial waste, and never discard it with regular trash.
ワㄐㄕㄊ㄄ㄆ
• Be sure to delete all registered data when transferring or discarding the laser marker. Retained data might result in illegal
read out and leaking of information by a third-party with malicious intent.
• To initialize the data registered in the laser marker, double-click and execute “DeleteUserData.exe” included in the
installation folder (Laser Marker Smart Utility - Tools) of “Laser Marker Smart Utility”.
If you specify the installation destination of Laser Marker NAVI Smart Utility to the default folder, you can find
“DeleteUserData.exe” at the following location.
C:\Program Files (x86)\Panasonic-ID SUNX Laser\Laser Marker Smart Utility\Tools\DeleteUserData\DeleteUserData.
exe
or
C:\ProgramFiles\Panasonic-IDSUNXLaser\LaserMarkerSmartUtility\Tools\DeleteUserData\DeleteUserData.exe
• If the optional function expansion board is installed, make sure that no external storage medium such as a USB flash
drive is connected to the USB ports on the controller (1 position on the front and 2 positions on the back) before disposal.
7-5-1 Separate disposal of head section
This laser marker has some parts containing the following chemicals of concern for disposal.
When you request the industrial waste disposer to dispose of this product, inform them that the following chemicals are
used in the head, and segregate and dispose them appropriately.
In some countries and regions these chemicals are designated as hazardous substance in some countries and regions.
For the correct method of disposal, in accordance with the regional regulation, please contact your local municipality, waste
disposal services, or the point of sale where you purchased the products.
Internal parts to be concerned for disposal
No. Name Containing materials
q
CO
2
laser oscillator ZnSe (zinc selenide)
w
Lens in beam
expander
e
Laser emission port
(f θ lens)
e
e
w
q
q
w
Standard head model Tower head model
WARNING
• When the lens is broken, wear gloves, a mask, and protective goggles to
prevent swallowing or inhaling broken pieces/dust or the adherence to the
skin.
ME-LPRH-SM-3