Panasonic LP-M Series, Operation Manual, Page: 226 / 308

226
„
Operator Adjustment Screen/Adjustment Accepted Parameters
The setting parameters that can be set on the operator's adjustment screen are selected. Refer to “2-4 Operator Adjustment
Screen” (P.85).
1
2
Description
1 Setting permission:
Check the respective boxes to make the adjustment on the operator’s adjustment screen possible.
• X/Y Offset
• Z Offset (LP-M/Z series only)
• Line Speed (Except LP-SxxxW type)
• Laser Power
• Scan Speed
• Laser Pulse Cycle (Except LP-SxxxW type)
• Change File No.
• Overwriting
• Marking Energy (LP-M series /LP-Sxxx type only)
• Laser Check
2 Editable Lines:
Sets the number of line possible to be edited at the edition of character setting on the operator’s adjustment
screen.
Setting Range 0 to 99 lines
Reference
• Setting of password is useful to avoid unintentional change of setting by operator. Setting of parameters only the
specified operators can change is possible, too. Refer to “2-16-1 Display Setting (Environment 1)” (P.225) or “2-3-3
Password to Open the Setting Screen” (P.84) for the setting of password.
ME-LPMSZ-OP-7