Panasonic LP-GS Series, Setup & Maintenance Manual

Page: 100 / 190

100
4-6-7 Time/date hold input and date gap output
OFF
OFF
OFF
OFF
OFF
ON
ON
ON
ON
ON
READY OUT (Y5)
DATE GAP OUT (No.29)
TIME HOLD IN (No.22)
TRIGGER IN (X5)
PROCESSING OUT (Y10)
Actual date
Date change
8 o’clock of day 2
Day 1 Day 2
Example: at 15 o’clock of day 1
(15 o’clock of day 1) (15 o’clock of day 1) (Mark 8 o’clock of day 2)
Mark
retained time
Mark
retained time
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• TIME HOLD IN (No.22) is available even when the remote mode is turned OFF.
• If TIME HOLD IN (No.22) is turned ON when powering on the laser marker, it retains the system startup time.
• While TIME HOLD IN (No.22) is turned on, the time will be retained regardless of the file number, remote mode ON/OFF
status, or error status.
• If you turn on/off TIME HOLD IN (No.22) continuously, keep the OFF time at least for two seconds.
4-6-8 Counter end output
T1 T1 T1 T1
ON
OFF
ON
OFF
ON
OFF
ON
OFF
PROCESSING OUT (Y10)
COUNT END A/B/C/D OUT
(No.30/31/32/33)
TRIGGER IN (X5)
READY OUT (Y5)
Mark the counter end value
Item Time Remarks
T1 2ms or more Keep the ON status for 2ms or more.
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• Assign the counter No. to COUNT END A OUT to COUNT END D OUT (No.30 to 33) in system settings of Laser Marker
NAVI smart.
• COUNT END A/B/C/D OUT remains turned ON with the shutter open until the next marking trigger is input. When you
close the shutter, COUNT END A/B/C/D OUT turns OFF.
• COUNT END A/B/C/D OUT is disabled when “counter update per step” is configured at Step & repeat.
ME-LPGS-SM-8