Panasonic LP-GS Series, Serial Communication Command Manual

Page: 125 / 180

125
3-11-3 Line speed: LSP
Supported model: LP-RC series / LP-RF series / LP-RV series
Sets the line speed of on-the-fly marking for the selected marking file.
⿎ Setting request data / response data for readout
Start
code
LSP
Sub
command
[Line speed]
7-byte
(Check
sum)
End code
Sub command is “S” for the setting request data and “A” for the response data for readout.
⿎ Readout request data
Start
code
LSP R (Check sum) End code
⿎ Data description
Name
Data length
[byte]
Data contents Remarks
Line speed 7 “000.060”–“240.000” [m/min.]
Only when line speed control is set to
“fixed speed”, set this value.
Total data length 7 Fixed length.
⿎ Example of command settings
Condition: Line speed = 80
• Setting
Transmission data [STX] LSP S 080.000 [CR]
• Readout
Transmission data [STX] LSP R [CR]
Response data [STX] LSP A 080.000 [CR]
ME-LP-GS-SR-COMP-3