Panasonic LP-400 Series, Operation And Maintenance Manual

Page: 55 / 334

55
Rear
1
3
4
5
8
7
2
9
6
10
14
11
12
13
15
1
3
4
5
8
7
2
9
6
11
10
13
14
12
16
15
LP-400 Series LP-V/LP-W Series
1. Return Connector: RETURN OUT
This is the connector for connecting the attached return harness for using console (option).
2. RS-232C Connector: RS-232C
This is the connector for connecting to the external device so as to control the laser marker with RS-232C.
For details, refer to External Control Manual.
3. Ethernet Port
This is the connector for connecting to the external device to control the laser marker with Ethernet.
For details, refer to External Control Manual.
If Ethernet is not used for the external control, connect nothing to the Ethernet port.
4. VGA Connector: VGA OUT
This is the connector for connecting VGA OUT monitor. When using a console (optional item), connect the attached
return harness.
5. USB Connector A (2 connectors)
This is the terminal for connecting the USB media or USB mouse.
For registering or saving data in the laser marker, connect a commercially available USB.
You can also connect a USB mouse when setting by using a commercially available monitor.
A USB port is also mounted on the front.
Notice
• Do not connect the USB devices other than a USB media or a USB mouse.
6. Console Return Connector: (VGA+RETURN)IN
This is the connector for connecting the attached return harness for using console (option).
ME-LP400V-OP-6