Panasonic LP-400 Series, Operation And Maintenance Manual

Page: 53 / 334

53
1-6-2 Controller
Front
5
4
3
6
9
2
2
1
7
8
10
6
1
5
4
3
9
7
8
10
LP-400 Series LP-V/LP-W Series
1. Key Switch: POWER
This key switch is used to start the laser marker system.
Turn ON ( | ) the switch to start-up the system, and turn OFF ( o ) the switch to shutdown
the system.
When the laser marker is not used, remove the key, and the safety manager must keep it.
Since the ON/OFF operation of the key switch makes a load to the laser marker, leave
an interval for 5 seconds or more from turning OFF the power to turning ON the power
again.
Do not turn off the power supply while the system starts (during the system start indicator is flashing).
2. Controller display panel
The indicator that shows the status of laser radiation and the laser
marker.
No. Display name Status Indication
q
FILE No. / ERROR CODE Normal state Displays selected file No.
Alarm or warning status Displays error code No. Refer to
“Error Indication” (P.301).
w
MAIN System is powered on Green lighted-up
System under starting up
(uncompleted) Green flashing
e
MARKING Being in laser emitting Orange lighted-up
ヱヰヸユ
ン
OFF
ON
w
e
q
ME-LP400V-OP-6